 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Semiconductor S79xxPI Fixed-Negative-Voltage Regulator Descriptions This series of fixed-negative-voltage monolithic integrated-circuit voltage regulators is designed to complement series S7800 in a wide range of applications. These applications include on-card regulator for elimination of noise and distribution problems associated with single point regulations. Each of these regulators can deliver up to 1.0 amperes of output current. The internal current Limiting and thermal shutdown features of these regulators make them essentially immune to overload. In addition to use as fixed-voltage regulators, these device can be used with external components to obtain adjustable output voltages and also as the power pass element in precision regulators. Features * Output Current UP to 1.0A * Internal Thermal Overload Protection * Internal Short-Circuit Current Limiting * No External Components * Output Transistor Safe-Area Compensations Ordering Information Type NO. S79xxPI Marking S79PI Package Code TO-220F :Voltage Code (05:-5V, 08:-8V, 09:-9V,12:-12V,15:-15V) Outline Dimensions unit : mm PIN Connections 1. GND 2. Input 3. Output KSI-2026-002 1 S79xxPI Absolute Maximum Ratings Characteristic Operating Input voltage Power Dissipation (Tc=25) Power Dissipation (without Heatsink) Operating Junction Temperature Storage Temperature Ta=25C Symbol VIN PD PD TJ TSTG Ratings -35 20.8 2.0 -30 ~ 125 -55 ~ 150 Unit V W W C C Electrical Characteristics (TJ = 0 to 125, Vin= -10V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Test Condition Tj =25 IOUT=5mA ~ 1A VIN=-7.0V ~ -20V, PD 15W VIN=-7.0V ~ -25V VIN=-8.0V ~ -12V IOUT=5mA ~ 1.0A IOUT=250mA ~ 750mA S7905PI Min. -4.8 -4.75 - Typ. -5.0 -5.0 12.5 4 15 5 1.5 0.15 0.08 125 60 2.0 -0.4 2.1 Max. -5.2 Unit Output Voltage VOUT V -5.25 50 15 100 50 2.0 0.5 0.5 uVrms dB V mV/C A mA mA mV Line Regulation VOUT Tj =25 mV Load Regulation VOUT IB IB VN RR VD of TCVO IPK Tj =25 Tj =25 Quiescent Current Quiescent Current Change VIN = -7.0V ~ -25V IOUT = 5mA ~ 1A Output Noise Voltage Ripple Rejection Ratio Dropout Voltage Temperature coefficient output Voltage Drift Peak Output Current f=10Hz ~ 100KHz Tj =25 54 - f=120Hz, VIN =-8.0V ~ -18V IOUT=1A IOUT=5mA Tj =25 Tj =25 - Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. KSI-2026-002 2 S79xxPI Electrical Characteristics (TJ = 0 to 125, Vin= -14V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Test Condition Tj =25 IOUT=5mA ~ 1A VIN=-10.5V ~ -23V, VIN=-10.5V ~ -25V VIN=-11.0V ~ -17V IOUT=5mA ~ 1.0A IOUT=250mA ~ 750mA PD 15W S7908PI Min. -7.7 -7.6 - Typ. -8.0 -8.0 12.5 4 15 5 1.5 0.15 0.08 200 60 2.0 -0.6 2.1 Max. -8.3 Unit Output Voltage VOUT V -8.4 160 80 160 80 2.0 1.0 0.5 uVrms dB V mV/C A mA mA mV Line Regulation VOUT Tj =25 mV Load Regulation VOUT IB IB VN RR VD of TCVO IPK Tj =25 Tj =25 Quiescent Current Quiescent Current Change VIN = -10.5V ~ -25V IOUT = 5mA ~ 1A Output Noise Voltage Ripple Rejection Ratio Dropout Voltage Temperature coefficient output Voltage Drift Peak Output Current f=10Hz ~ 100KHz Tj =25 54 - f=120Hz, VIN =-11.5V ~ -21.5V IOUT=1A IOUT=5mA Tj =25 Tj =25 Tj =25 Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. KSI-2026-002 3 S79xxPI Electrical Characteristics (TJ = 0 to 125, Vin= -15V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Test Condition Tj =25 IOUT=5mA ~ 1A VIN=-11.5V ~ -23V, VIN=-10.5V ~ -25V VIN=-110V ~ -17V IOUT=5mA ~ 1.A IOUT=250mA ~ 750mA PD 15W S7909PI Min. -8.70 -8.60 - Typ. -9.0 -9.0 10 5 12 4 3 0.1 0.08 175 60 2.0 -0.4 2.1 Max. -9.30 Unit Output Voltage VOUT V -9.40 180 90 180 90 6 1.0 0.5 uVrms dB V mV/C A mA mA mV Line Regulation VOUT Tj =25 mV Load Regulation VOUT IB IB VN RR VD of TCVO IPK Tj =25 Tj =25 Quiescent Current Quiescent Current Change VIN = -11.5V ~ -25V IOUT = 5mA ~ 1A Output Noise Voltage Ripple Rejection Ratio Dropout Voltage Temperature coefficient output Voltage Drift Peak Output Current f=10Hz ~ 100KHz Tj =25 54 - f=120Hz, VIN =-9.0V ~ -19V IOUT=1A IOUT=5mA Tj =25 Tj =25 Tj =25 Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. KSI-2026-002 4 S79xxPI Electrical Characteristics (TJ = 0 to 125, Vin= -19V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Test Condition Tj =25 IOUT=5mA ~ 1A VIN=-14.5V ~ -27V, VIN=-14.5V ~ -30V VIN=-16.0V ~ -22V IOUT=5mA ~ 1.0A IOUT=250mA ~ 750mA PD 15W S7912PI Min. -11.5 -11.4 - Typ. -12.0 -12.0 5 3 15 5 2.0 0.04 0.08 300 60 2.0 -0.8 2.1 Max. -12.5 Unit Output Voltage VOUT V -12.6 80 30 200 75 3.0 0.5 0.5 uVrms dB V mV/C A mA mA mV Line Regulation VOUT Tj =25 Load Regulation VOUT IB IB VN RR VD of TCVO IPK Tj =25 Tj =25 mV Quiescent Current Quiescent Current Change VIN = -14.5V ~ -30V IOUT = 5mA ~ 1A Output Noise Voltage Ripple Rejection Ratio Dropout Voltage Temperature coefficient output Voltage Drift Peak Output Current f=10Hz ~ 100KHz, Tj =25 54 - f=120Hz, VIN =-15V ~ -25V IOUT=1A IOUT=5mA Tj =25 Tj =25 Tj =25 Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. KSI-2026-002 5 S79xxPI Electrical Characteristics (TJ = 0 to 125, Vin= -23V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Test Condition Tj =25 IOUT=5mA ~ 1A VIN=-17.5V ~ -30V, VIN=-17.5V ~ -30V VIN=-20V ~ -26V IOUT=5mA ~ 1.0A IOUT=250mA ~ 750mA PD 15W S7915PI Min. -14.4 -14.25 Typ. -15.0 -15.0 5 3 15 5 2.0 0.04 0.08 375 60 2.0 -1.0 2.1 Max. -15.6 Unit Output Voltage VOUT V -15.75 Line Regulation VOUT Tj =25 - 100 50 200 75 3.0 0.5 0.5 uVrms dB V mV/C A mA mA mV Load Regulation VOUT IB IB VN RR VD of TCVO IPK Tj =25 Tj =25 mV Quiescent Current Quiescent Current Change VIN = -17.5V ~ -30V IOUT = 5mA ~ 1A Output Noise Voltage Ripple Rejection Ratio Dropout Voltage Temperature coefficient output Voltage Drift Peak Output Current f=10Hz ~ 100KHz, Tj =25 54 - f=120Hz, VIN =-18.5V ~ -28.5V IOUT=1A IOUT=5mA Tj =25 Tj =25 Tj =25 Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. Test circuit KSI-2026-002 6 S79xxPI Electrical Characteristic Curves Fig. 1 VOUT - VIN Fig. 2 Dropout - Voltage Fig. 3 IB - Tj Fig. 4 VOUT - Tj Fig. 5 ISC - VIN KSI-2026-002 7 S79xxPI These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KSI-2026-002 8 |
Price & Availability of S7912PI
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |